Econex BFV and GD Butterfly Valves

Description

Original Econex butterfly valves – BFV and GD

BFV aluminium valves for gas and air up to DN250 and GD high-temperature valves, from an authorised Econex distributor – also in a lower-cost line. Send us the part code for a quote.

Send us the part codeWhatsApp

Econex butterfly valves

Econex butterfly valves regulate the flow of combustion gas and air on burners, kilns, dryers and furnaces – the BFV series in aluminium – and of hot air and flue gas – the GD(H) and LDK high-temperature series. They work by hand or with an Econex electric actuator.

Atlas Trading is an authorised Econex distributor. We supply original Econex butterfly valves, with access to the manufacturer’s stock. Send us the part code and we identify the exact version for you.

Why buy Econex from Atlas Trading

  • Econex Butterfly Valves: we check your code before quoting
  • Competitive prices on the whole Econex range
  • Original Econex components from an Italian manufacturer active since 1979
  • Fast access to Econex’s large stock
  • Actuators, solenoid valves, pressure switches, flame control and gas trains
  • Send us the part code: we identify the part for you
  • We reply in English, Spanish, French and Portuguese – worldwide shipping

Request a quote

On this page: BFV · GD(H) and LDK · Lower-cost line · Actuators · FAQ

BFV butterfly valves for gas and air

BFVData
BodyAluminium; stem AISI 303; stem sealing with two Viton O-rings
DiscAluminium from DN25 to DN150; AISI 304 for DN200 and DN250
SizesDN25 to DN250, also with one or two orifice reductions
InstallationBetween two flanges ISO 7005 PN16, in any position
Max pressure500 mbar
Temperature−10 to +60 °C for gas, −10 to +80 °C for air; up to +200 °C for air on request
GasesGases of the 1st, 2nd and 3rd family and air; certified to EN 13611, group 2
Control ratio10:1; internal leakage about 1% of Kvs
OperationManual lever (.A) or free shaft for an actuator (.B); mechanical position indicator; rotation lockable from 0° to 90°

BFV code: BFV + DN, the orifice when reduced, then .A (lever) or .B (free shaft) – for example BFV80/65.B = DN80 with 65 mm orifice and free shaft. Add 1 or 2 to the letter for the 110 °C or 200 °C version. Datasheet: Econex BFV butterfly valves (PDF).

GD(H) and LDK high-temperature butterfly valves

GD(H) and LDKData
UseHot air and flue gas without corrosive substances: kilns and furnaces, dryers, foundries, heat treatment
BodyGrey cast iron GG25 or stainless steel AISI 304
Disc and spindleDisc in St.37 steel, GG25 or AISI 304; spindle in St.37, AISI 420, 303 or 321; graphite or alu-silicate packing
SizesGD from DN15, LDK from DN63, up to DN5000
ConnectionGD wafer PN6, PN10, PN16; LDK-1 wafer and LDK-4 flanged, DIN 24154 T2R2
Standard temperatureGD(H)3 350 °C · GD(H)4 450 °C · GD(H)6 650 °C (external bearings) · LDK 450 °C
Max temperature−40 to +1,000 °C, depending on materials
Pressure1 bar differential, 16 bar absolute
Leakage1% of Kv; 0.1–0.2% with ledge seat; 0.01–0.02% with ledge seat and flexible sealing
VersionsGD with free shaft, electric or pneumatic actuator; GDH with ratchet handle lockable in 16 positions

Drive torque of GD valves at 100 mbar: DN100 15 Nm · DN150 25 Nm · DN200 37 Nm · DN300 42 Nm · DN400 57 Nm · DN500 75 Nm. Datasheet: GD(H) and LDK high-temperature butterfly valves (PDF).

Lower-cost Econex line

In recent years Econex has introduced a line of butterfly valves very similar to the BFV and GD series, at a considerably lower cost. When you send us your request, we can quote this lower-cost version as well.

Actuators for Econex butterfly valves

ActuatorTorqueUse
Econex AB13 to 5 NmSmall valves
Econex AR24 to 20 NmThe most requested: 230 V, 60 s, on/off
Econex S07.5 to 180 NmLarge valves

How to identify your Econex butterfly valve

Send us the code – series, DN, orifice and version – the medium (gas, air or flue gas) and the temperature, and the actuator model if the valve is motorised.

Frequently asked questions

Which Econex butterfly valves do you supply?

BFV aluminium valves for gas and air from DN25 to DN250, and GD(H) and LDK high-temperature valves up to DN5000, manual or with AB1, AR2 or S0 actuators.

What is the difference between BFV and GD?

BFV valves are in aluminium, for combustion gas and air up to 500 mbar and +60 °C (gas) or +80 °C (air). GD(H) and LDK valves are in cast iron or stainless steel, for hot air and flue gas from 350 to 650 °C in the standard versions and up to 1,000 °C.

Is there a lower-cost version?

Yes. Econex has introduced a line of butterfly valves very similar to the BFV and GD series at a considerably lower cost: we can quote both versions.

What does a code like BFV50/32.B mean?

A DN50 valve with a 32 mm orifice and free shaft for an actuator; .A is the version with manual lever. Add 1 or 2 to the letter for the 110 °C or 200 °C version.

Which actuator do I need?

It depends on the drive torque: a GD valve at 100 mbar needs 15 Nm at DN100 and 37 Nm at DN200. The AR2 gives up to 20 Nm, the S0 up to 180 Nm.

Are you an Econex distributor?

Yes. Atlas Trading is an authorised Econex distributor: we supply original Econex components with access to the manufacturer’s stock.

What do you need to quote a butterfly valve?

The code, or series, DN, medium and temperature, and the actuator model if the valve is motorised – plus the quantity.

Do you ship worldwide?

Yes. We supply customers worldwide and reply in English, Spanish, French and Portuguese.


See the full Econex range or request a quote.

Request a quote

    Send us the part code, the machine model or a photo of the nameplate. We reply in English, Spanish, French and Portuguese.