Econex S0 Rotary Actuators for Large Valves
Econex S0 electric rotary actuators – S01, S02 and S03, 7.5 to 180 Nm – for large butterfly valves, ball valves and dampers. Authorised Econex distributor.
Description
Econex S0 rotary actuators
Electric rotary actuators from 7.5 to 180 Nm for large butterfly valves, ball valves and dampers. Original Econex, from an authorised Econex distributor. Send us the part code for a quote.
Econex S0 rotary actuators for large valves
The Econex S0 series are electric and electronic spur gear actuators for industrial and chemical combustion plants. They drive large butterfly valves, ball valves, air locks and dampers – where the AB1 (3–5 Nm) and the AR2 (4–20 Nm) are not enough. The motor is bidirectional, with high static and maintaining torque, for 3-position control; on request with a 0(4)–20 mA or 0–10 V dc signal.
Atlas Trading is an authorised Econex distributor: we supply original S0 actuators with access to the manufacturer’s stock.
Why buy Econex from Atlas Trading
- Econex S0: we check your code before quoting
- Competitive prices on the whole Econex range
- Original Econex components from an Italian manufacturer active since 1979
- Fast access to Econex’s large stock
- Actuators, solenoid valves, pressure switches, flame control and gas trains
- Send us the part code: we identify the part for you
- We reply in English, Spanish, French and Portuguese – worldwide shipping
On this page: Models · Technical data · Order code · AB1, AR2 or S0? · FAQ
S0 models and torque
| Model | Torque | Rotation time for 90° |
|---|---|---|
| S01-10 | 7.5 to 31 Nm | 7.5 to 60 s |
| S02-20 | 7.5 to 40 Nm | 7.5 to 60 s |
| S02-25 and S02-50 | 20 to 60 Nm | 7.5 to 60 s |
| S03-120 | 30 to 180 Nm | 15 to 60 s |
The torque depends on the version and on the rotation time; other rotation times, quicker or slower, on request. The table of each version is in the S0 datasheet (PDF).
Technical data
| S0 | Data |
|---|---|
| Rated torque | 7.5 to 180 Nm, depending on model |
| Rotation time | 1 to 120 s for 90° at 50 Hz, depending on model |
| Rotation angle | 20° to 320° |
| Motor shaft | Ø 12 to 20 mm, or 9.5 mm square |
| Body and cover | Stamped plate (S01, S02-20); sand-cast aluminium (S02-25, S03) |
| Enclosure | IP54 (S01, S02-20); IP65 (S02-25, S03) |
| Supply voltage | 230 V ac 50-60 Hz; on request 115 V ac (not S03-120), 24 V ac and dc |
| Control | 3-position; on request 0(4)–20 mA or 0–10 V dc input and output |
| Duty cycle | Continuous, 100% |
| Ambient temperature | −10 to +60 °C |
| Weight | About 3.2 to 7 kg, depending on model |
| Installation | In any position; anticlockwise rotation seen from the top |
On request: feedback potentiometer from 150 Ω to 2.5 kΩ (up to two), up to 8 adjustable auxiliary microswitches, manual/automatic operation with Open/Close/Stop service switch, adjustable shaft shape, extra cable glands M16x1.5 or M20x1.5.
S0 order code
| Position | Options |
|---|---|
| Model | Type and version from the torque table – for example S02-25/4500 |
| Supply voltage | A = 24 V ac · B = 115 V ac · C = 230 V ac · B/A, C/A = with transformer to 24 V ac |
| Rotation time for 90° | 1 = 15 s · 2 = 30 s · 3 = 60 s · 4 = 120 s |
| Feedback potentiometer | 00 = none · 13 = 1 kΩ |
| Auxiliary microswitches | 0 = none · 2 = two adjustable switches |
| Accessories | S = Auto/Man control station with Open/Stop/Close · E8 = 4–20 mA input and output · E7 = 0–10 V dc input and output |
AB1, AR2 or S0?
| Actuator | Torque | Typical use |
|---|---|---|
| Econex AB1 | 3 to 5 Nm | Modulating valves such as the Econex MPV, small butterfly valves and dampers |
| Econex AR2 | 4 to 20 Nm | Butterfly valves and dampers, on/off or modulating |
| Econex S0 | 7.5 to 180 Nm | Large butterfly valves, ball valves and dampers |
For Econex GD high-temperature butterfly valves at 100 mbar the drive torque goes from 15 Nm (DN100) to 75 Nm (DN500): see Econex butterfly valves.
How to identify your S0
Send us the full code – type, supply voltage, rotation time, potentiometer, microswitches and accessories, with the quantity. For a new application: valve type and size, torque and control signal.
Technical documentation
Econex S0 rotary actuators (PDF)
Frequently asked questions
When do I need an S0 instead of an AR2?
When the valve needs more torque: the S0 covers 7.5 to 180 Nm, the AR2 4 to 20 Nm and the AB1 3 to 5 Nm.
Which torque do the S0 models give?
S01-10 from 7.5 to 31 Nm, S02-20 from 7.5 to 40 Nm, S02-25 and S02-50 from 20 to 60 Nm, S03-120 from 30 to 180 Nm, depending on the rotation time.
Can the rotation angle be changed?
Yes. The S0 works from 20° to 320°; when the angle changes, the input and output signal adjust automatically.
Which control signals are available?
3-position as standard; on request 0(4)–20 mA or 0–10 V dc input and output, potentiometer or stepper motor control.
Which supply voltages are available?
230 V ac 50-60 Hz as standard; on request 115 V ac (not for the S03-120) and 24 V ac or dc.
What do you need to quote an S0?
The full code, plus the quantity.
Are you an Econex distributor?
Yes. Atlas Trading is an authorised Econex distributor: we supply original Econex components with access to the manufacturer’s stock.
Do you ship worldwide?
Yes. We supply customers worldwide and reply in English, Spanish, French and Portuguese.
See the full Econex range or request a quote.











