Atlas TrueColor – Color Management Software
for Digital Ceramic Decoration

0:00 / 1:43

Atlas TrueColor in 100 seconds: how it works, real production tests, savings in four-color (CMYK) mode.

Share

Atlas TrueColor color management software

Atlas TrueColor is the color management software for digital ceramic decoration supplied by Atlas Trading. It creates ICC profiles and printer calibrations that cut ink consumption in four-color (CMYK) printing and keep the approved color stable at the kiln exit, batch after batch. It is an open system that works with every printer model, and a modular one, available in versions for every need. Request a free test on your product: we send you the test chart, you send us the readings.


Why choose Atlas TrueColor

  • Less ink: up to −44%, with the color within ΔE 3.0 – Ink Saving works in four-color (CMYK) mode only
  • Consistent color at the kiln exit, batch after batch
  • Open system: works with every printer model and your existing workflow
  • Modular: versions for every need, always upgradable
  • Profiles, data and know-how stay in your own lab
  • Training and support from Atlas Trading – free test on your product

Request a free test

On this page: Functions · ICC profiles · Printer calibration · CMYK Ink Saving · Consistent color · From scan to tile · Versions · Free test · FAQ


What Atlas TrueColor does

Atlas TrueColor is a color management software developed for the ceramic industry and for digital industrial printing. Its functions:

ICC profile creation – RGB, CMYK and multichannel profiles, made for ceramic inks and colored substrates

Printer calibration (linearization) – a known, repeatable printer condition, with ink optimization built in

CMYK Ink Saving – ink reduction levels in the CMYK profiling module: Ink Saving works in four-color (CMYK) mode only

FileCalibrator and hot folders – the calibration applied to production files, manually or automatically

ReproUnit – reproduction of existing products and graphic file conversion between printing conditions

Target Manager – color chart generation, measurement and analysis of the measurement file

CMYK and multicolor paper proofing

Printer management – in the COMBO versions, a software RIP drives industrial printers and proofing plotters

Printer diagnostic, multichannel editor and White Point Optimizer

Better ICC profiles for ceramic inks

The ICC profile is a decisive step for the final quality of the product, in colors and details: a high quality profile gets the best color rendering from the printing system, while working with the wrong profiles is the worst approach to digital printing. The Atlas TrueColor profiling module is built for ceramic inks and for colored substrates such as glazes and engobes, which are not white.

Better color rendering in the separation of the graphic file

Better print quality, color depth and detail than a generic ICC profile

Effective management of ink usage in multichannel mode

A multichannel profile automatically comes with an RGB preview profile, for a reliable soft proof of the final print, and a CMYK profile to assign after conversion

How the right profile is made

1. Print and fire a test form to check the printing condition and find the right total ink value.

2. Generate the color chart according to the instrument, tile size, total ink value and patch size.

3. Add the color chart, with the right ink limit, to the test form.

4. Print and fire the new test form.

5. Measure the color chart and analyze the measurement to find any error.

6. Make ICC profiles with different black generation settings, according to your needs.

7. Check the profiles in Photoshop with an RGB test image, in soft proofing and converted mode, and choose the best one.

8. Use the chosen profile with the production graphic files.

The test form must be printed exactly in the same conditions as production: printer, ink set, glaze, linearization and firing.

CMYK or multichannel?

The ink set decides the mode. Four-color ink sets with black ink are managed in CMYK mode; four-color ink sets without black ink, and ink sets with five or more inks, are managed in multichannel mode. When the same ink is loaded on two bars, the two bars count as one ink.

Printer calibration: the right amount of ink

Ink optimization is the most important function to get the best performance and quality from any printing system. The right amount of ink – neither too much nor too little – solves typical problems such as drying, loss of detail, blistering, stripes and matting. The correct method is printer calibration: limiting the total ink in the ICC color chart only tries to remedy a wrong calibration. Printer calibration is always made before the ICC profile, in three steps:

1. Single ink limitation – the 100% of each ink is defined (in CIELab chroma for the colors, in density for black).

2. Tonal values reproduction – the linearization: a linear midtone curve for every ink.

3. Total ink amount – the best compromise between black darkness, sharp edges, detail, the lowest ink value and no defects such as bubbles or blistering.

The calibration is saved in a file and, from then on, applied by FileCalibrator to every graphic file before it is sent to the printer RIP – manually, or automatically through a hot folder that feeds the RIP input folder.

CMYK Ink Saving: less ink, same color

Ink Saving works in four-color (CMYK) mode only. Inside the CMYK profiling module, the 4C/RU, MC/RU, COMBO-M/RU and COMBO-G/RU versions include an advanced ink reduction tool: five preset levels, from very low to very high, plus a custom mode. Each level corresponds to a ΔE value measured against the same profile made without ink reduction, within ΔE max 3.0. The higher the level, the higher the saving and the lower the color precision: very low and low are the recommended levels.

Ink reduction levelTotal ink amountInk savingColor
None (reference profile)141%0%Reference
Very low78%44.6%Acceptable gap from the reference
Medium61%56.7%Visible gap
Very high58%58.8%Visible gap

Example from the software guide. The saving works through gray component replacement (GCR): part of the gray made by the three colored inks is replaced by black ink, with the same final color. More black generally gives a more three-dimensional image, more neutral grays and less ink.

How much you save depends on the design:

DesignIndicative average saving
Light backgrounds, white marbles5–10%
Greys, concrete, stone15–25%
Dark backgrounds, black marbles30–50% and more

Less ink also means fewer drying problems, less blistering and fewer stripes, and sharper details: on the black marble test the Atlas TrueColor profile gives deeper blacks and sharper veins with 44% less ink coverage.

The saving is appreciable and reliable when you develop new products; when you reproduce an existing product on another line or with another ink set it is not always guaranteed.

The best results come from the CMYK profiles combined with the Atlas TrueColor printer calibration (FileCalibrator).

Ink reduction levels also help balance the channel separation of the graphic files.

Ink coverage values are a reliable forecast, not the real consumption: the real consumption is the one read from the printer RIP.

Consistent color at the kiln exit

In production nothing stands still: kiln settings, glazes, engobes, inks and the printer itself change over time, and each change shifts the color of the tile at the kiln exit. Without measurement the shift is noticed late and corrected by eye, with repeated tests and rejects. Atlas TrueColor works in three steps:

Measure – print a color chart, fire it and read it with a spectrophotometer.

Elaborate – Atlas TrueColor detects the shift from the approved reference.

Compensate – new profiles and calibrations realign the graphic files to the approved color.

The test form printed in the reference condition is also your stability check: printed again, if its grayscale shows a different color cast, the production conditions have changed.

ReproUnit: reproducing an existing product

Reproducing an existing product on another line, in another plant or with another ink set is the hardest challenge in the whole printing industry. Without colorimetric data on the reference condition it takes many intermediate tests. The ReproUnit tool reduces tests and production times; its starting point is a colorimetric database of your reference products.

From scan to tile: new product development

To reproduce a natural material – wood, stone, marble, texture – on a ceramic substrate, every device in the workflow must speak the same color: scanner or digital camera, monitor, proofing printer and ceramic printer. Without that, the final tile does not match the natural material, with many trials, no guarantee of the result and destructive color corrections that lose detail. The Scanner2Tile workflow of Atlas TrueColor matches the colors at every step, so that the first print matches the target color, within the color space of the printing condition:

1. Scanner or digital camera setup and calibration.

2. ICC printer profile made with Atlas TrueColor.

3. Color adjustment of the graphic file in Photoshop and conversion.

4. Paper color proofing (optional).

5. Printing on the ceramic substrate.

Maximum color accuracy and consistency through the whole workflow (what you see is what you get)

Non-destructive color correction of the graphic files

Far fewer printing tests and faster development of new products

Especially suited to multicolor printing systems

Atlas TrueColor versions

Atlas TrueColor is modular. The stand-alone versions make ICC profiles and manage reproduction between printing conditions; the COMBO versions add a RIP engine that drives industrial printers and proofing plotters, working with the RIPs supplied by the printer manufacturers. Both are available for CMYK (4C, four colors) and multicolor (MC) printing. Every version can be upgraded to a higher one at any time.

Function4C4C/FC4C/RUMCMC/FCMC/RUCOMBO-MCOMBO-M/RUCOMBO-GCOMBO-G/RUFC
CMYK printer RIP––––––✓✓✓✓–
Multicolor printer RIP––––––––✓✓–
Printer calibration–✓✓–✓✓✓✓✓✓–
Calibration processing (FileCalibrator)–✓✓–✓✓✓✓✓✓✓
CMYK proofing––––––✓✓✓✓–
Multicolor proofing–––––––✓✓✓–
Hot folder––✓––✓✓✓✓✓–
ReproUnit––✓––✓–✓–✓–
Printer diagnostic––✓––✓–✓✓✓–
CMYK Ink Saving––✓––✓–✓–✓–
RGB-CMYK ICC profiles✓✓✓✓✓✓✓✓✓✓–
Multichannel ICC profiles–––✓✓✓––✓✓–
Multichannel editor–––✓✓✓––✓✓–
White Point Optimizer✓✓✓✓✓✓✓✓✓✓–

FC = FileCalibrator; RU = ReproUnit. FC alone is the stand-alone FileCalibrator, to apply the Atlas TrueColor printer calibration to production files.

WhoRecommended versions
Tile manufacturers4C/FC, 4C/RU, MC/FC, MC/RU, FileCalibrator stand-alone
Ink manufacturersMC/RU, COMBO-G/RU, FileCalibrator stand-alone
Printer manufacturersCustom versions integrated into your workflow, with printer management, hot folders and proofing

You install Atlas TrueColor yourself. Atlas Trading provides training – on colorimetry, color management and the use of the software – and support.

Why keep color management in-house

Ink is one of your biggest costs, and color is what your customer buys: both deserve your direct control. The ink supplier sells kilograms of ink; you want fewer grams per m². It is not about integrity: it is about incentives.

Profile left to the ink supplierProfile managed in-house with Atlas TrueColor
GoalSelling more kilograms of inkUsing less ink per m², same quality
Who creates the ICC profileThe supplier’s technicianYour own lab
Who owns data and know-howThe supplierYou
Comparing inksHard, one-sided dataMeasured with the same method
When kiln, glaze or engobe changeYou wait for the supplier’s technicianYou measure and recalibrate in-house
If you change ink supplierProfiles and history stay with themProfiles and history stay with you

Free test on your product

1. We send you the test chart.

2. You print it, fire it and read the colors with a spectrophotometer.

3. You send us the readings and a few designs, dark or rich in color.

4. We generate the ICC profile and send it to you.

5. You print the designs, compare print quality and ink consumption in g/m², and send us your feedback.

You see the result on your own line, with your own numbers.

Request a free test

Atlas Trading, founded in Milan in 1991 with a warehouse in Fiorano Modenese, supplies the ceramic industry and many other sectors from more than 200 suppliers: ceramic industry · digital printing spare parts · about us.

Frequently asked questions

Does Atlas TrueColor work with my printer and RIP?

Yes. Atlas TrueColor is an open system that works with every printer model used in digital ceramic decoration and with your existing workflow. Graphic files are converted with the new ICC profile and calibration and sent to the printer RIP as usual; the COMBO versions can also drive the printers directly through their own RIP.

Does the ink saving also work in multicolor printing?

No. The Ink Saving function (ink reduction level) is available only in the CMYK profiling module and only in the 4C/RU, MC/RU, COMBO-M/RU and COMBO-G/RU versions. In multicolor printing Atlas TrueColor optimizes the ink through printer calibration and manages ink usage in the multichannel profiles.

How much ink will I save?

It depends on the design: indicatively 5–10% on light backgrounds and white marbles, 15–25% on greys, concrete and stone, 30–50% and more on dark backgrounds and black marbles. The average saving declared by tile manufacturers is around 15%. The real figure comes from a free test on your product.

Is the ink saving guaranteed on existing products?

The saving is appreciable and reliable when you develop new products. When you reproduce an existing product on another line or with another ink set, the saving is not always guaranteed, for technical reasons. The best results come from the ICC profiles combined with the Atlas TrueColor printer calibration.

Does using less ink change the color?

Each ink reduction level corresponds to a ΔE value measured against the same profile made without ink reduction, with a maximum of ΔE 3.0. The very low and low levels are recommended: higher levels save more ink but make the color less precise.

Which spectrophotometers can I use?

The Target Manager tool of Atlas TrueColor generates and measures the color charts with the most common instruments: X-Rite, Barbieri, Myro and Spectro1.

What happens when the kiln, glaze, engobe or inks change?

You print the test form again: if the grayscale shows a different color cast from the reference, the production conditions have changed. You measure a new chart, Atlas TrueColor detects the shift and new profiles and calibrations realign the graphic files – in your own lab, without waiting for an external technician.

Can I use Atlas TrueColor with an ink set without black?

Yes. Four-color ink sets without black ink are managed in multichannel mode, with the MC versions. Double bars of the same ink count as one ink.

Who installs Atlas TrueColor and who provides training?

You install the software yourself. Atlas Trading provides training and support.

Can I upgrade my version later?

Yes. Every version can be upgraded to a higher one at any time.

How does the free test work?

We send you the test chart; you print it, fire it and read it with a spectrophotometer, then send us the readings and a few designs, dark or rich in color. We generate the ICC profile and send it to you; you print the designs and compare print quality and ink consumption in g/m².

Less Ink in CMYK

Color Stability

Open System

Modular Versions

Request a free Atlas TrueColor test

    Send us the part code, the machine model or a photo of the nameplate. We reply in English, Spanish, French and Portuguese.