Marpak AT30 Shrink Hood Machine – Combined Hooding and Thermoshrink

Description

Marpak AT30 shrink hood machine

Combined hooding and thermoshrink machine: hood forming and shrinking in one compact unit, for sealed pallets of tiles, bricks and building materials. New machines and spare parts – send us your pallet data or the machine serial number.

Send us the part codeWhatsApp

Marpak AT30 – shrink hood machine with hooding and thermoshrink

The Marpak AT30 is a shrink hood machine (shrink hooder) that combines hooding and thermoshrink: it forms a hood from tubular shrink film, places it over the pallet and shrinks it with gas heat in a single machine. The film adheres to the load and creates a rigid, sealed package, protected from water and dust – also for outdoor storage. The hood is formed by a patented movable unwinding head and cut to the size of each product.

Atlas Trading Company supplies new Marpak AT30 machines, their spare parts and PE shrink film.

Why buy Marpak from Atlas Trading

  • Competitive prices on Marpak machines and spare parts
  • New Marpak machines and Marpak and OMS spare parts – fast access to Marpak’s large stock
  • Marpak packaging machines and complete end-of-line solutions for tiles and slabs
  • Send us the part code: we identify the part for you
  • We reply in English, Spanish, French and Portuguese – worldwide shipping

Request a quote

On this page: Technical data · Working cycle · Advantages · Stretch hood or shrink hood · IT30 and FT58 · In ceramic plants · Film · Spare parts · FAQ

Technical data

Marpak AT30Data
Hourly outputUp to 40 packs (Marpak data)
FilmTubular PE shrink film on reel, 100–200 µm
Hood formingPatented movable unwinding head; hood cut to the size of each product
FuelMethane or LPG; gas pressure 20–200 mbar
Heat output320 kW
Gas consumptionAbout 0.28 m³ per cycle
Blower capacity700 m³/h
Electrical supply230/400 V, 50 Hz, 3 phases + neutral + earth; 6 kW
Compressed air6 bar; 25 Nl per cycle
Machine weight3,200 kg

Working cycle

  1. The hood is formed from the tubular film on the reel and cut to size by the movable unwinding head
  2. The arch lowers past the conveyor
  3. The hood is placed over the product, which can be raised
  4. The shrinking phase starts: the heat shrinks the film around the load

Advantages of shrink hood packaging

  • Rigid, sealed package: the shrunk film locks the load
  • Protection from water and dust, also for outdoor storage
  • Hooding and shrinking in one machine: compact layout
  • Hood made to measure for each pallet with the patented unwinding head
  • Suited to heavy and irregular loads

Stretch hood or shrink hood machine?

Marpak builds both: the AT30 shrink hood machine described on this page and the ST30 stretch hood machine, which holds the load with elastic film without heat.

Marpak ST30 stretch hood machineMarpak AT30 shrink hood machine
PackagingElastic film hood, stretched over the pallet without heatFilm hood shrunk on the load with heat
Hourly output (Marpak data)Up to 45 palletsUp to 40 packs
FilmTubular stretch film with side gussets, 80–180 µmTubular shrink film, 100–200 µm
EnergyElectricity (8 kW) and compressed airElectricity (6 kW), compressed air and gas: 320 kW, about 0.28 m³ per cycle
ResultLoad held by the film tension, protected on five sidesRigid, sealed package; very good for outdoor storage
Machine weight6.2 t3,200 kg

Separate hooder and shrink oven: IT30 and FT58

For higher outputs Marpak also builds hooding and shrinking as two machines: the IT30 automatic hooding machine (up to 60 pallets per hour, film 100–200 µm, reels up to 1,500 mm wide, double-reel IT 30/2 version) and the FT58 shrink oven with linear hot-air burners without open flame (methane or LPG, 320 kW, up to 60 packs per hour). We can quote these machines and their spare parts too.

The AT30 in ceramic plants

Thermoshrink is widely used for ceramic tiles, slabs, bricks and building materials: at the end of the line, after compaction and strapping, the AT30 seals the pallet against rain and dust for storage in the yard. It can be part of a complete Marpak packaging line for tiles and slabs.

Film for the AT30

The AT30 works with tubular PE shrink film; Marpak indicates 100–200 µm. We supply PE shrink film from 80 to 160 µm, with a recycled-polymer core: send us the thickness and width you use today.

AT30 spare parts

  • Movable unwinding head and hood forming parts
  • Welding and cutting parts
  • Shrink arch: burners, gas train components, ignition and flame detection
  • Blower and motors
  • Sensors, PLC and electrical parts
  • Pneumatic components

Send us the machine serial number and the part code: we identify it and quote the Marpak part.

What we need for a quotation

  • New AT30: pallet dimensions and heights, load weight, packs per hour, gas available (methane or LPG), end-of-line layout and voltage
  • Spare parts: machine serial number and part code or photo
  • Film: thickness and width you use today

Frequently asked questions

What is a shrink hood machine?

A shrink hood machine, or shrink hooder, places a hood of shrink film over the pallet and shrinks it with heat, so that the film adheres to the load. The Marpak AT30 does both in one unit: it forms the hood from tubular shrink film, places it over the pallet and shrinks it with gas heat.

How many packs per hour can the AT30 make?

Up to 40 packs per hour according to Marpak, depending on the pallet.

Which film does the AT30 use?

Tubular PE shrink film; Marpak indicates 100–200 µm. We supply PE shrink film from 80 to 160 µm: tell us the thickness you use.

Which gas does it use and how much?

Methane or LPG, at 20–200 mbar; heat output 320 kW; gas consumption about 0.28 m³ per cycle.

What is the patented unwinding head?

A movable unwinding head that forms and cuts the hood to the size of each product, so the film fits the pallet.

AT30 or ST30?

The AT30 shrinks the film with heat and gives a rigid, sealed package; the ST30 stretch hood machine uses elastic film without heat. The choice depends on the load, the storage and the energy available.

Do you supply spare parts for the AT30?

Yes: Marpak spare parts, including hood forming, shrink arch and gas train components. Send us the machine serial number and the part code.

Can you supply a new AT30?

Yes. Send us pallet dimensions and heights, load weight, packs per hour, the gas available and your end-of-line layout: we prepare the quotation.


See the full Marpak and OMS range or request a quote.

Request a quote

    Send us the part code, the machine model or a photo of the nameplate. We reply in English, Spanish, French and Portuguese.